Danfoss ECL Comfort 100M mixing heating controller 230 V – 087B1110
Danfoss ECL Comfort 100M, product code 087B1110, is an electronic weather-compensated controller for regulating the flow temperature in heating systems with a mixing valve.
The controller has two triac outputs for opening and closing a motorised valve and one relay output for controlling the heating-circuit circulation pump.
Outdoor, flow and room-temperature sensors can be connected. The controller uses Pt 1000 temperature sensors.
- manufacturer: Danfoss,
- model: ECL Comfort 100M,
- product code: 087B1110,
- supply voltage: 230 V AC, 50 Hz,
- power consumption: 5 VA,
- two triac outputs for a motorised valve actuator,
- triac-output load: 0.2 A at 230 V AC,
- relay output for the circulation pump,
- relay-output load: 4(2) A at 230 V AC,
- sensor type: Pt 1000,
- heating-curve range: 0.2–2.2,
- ambient temperature: 0 to 50 °C,
- enclosure rating: IP41,
- wall or panel mounting.
Important – product condition: The product is supplied without its original packaging. Check the photographs and the actual scope of delivery before ordering. The mounting socket, temperature sensors, analogue clock and other accessories are not necessarily included.
Before ordering, verify compatibility with the existing heating system, motorised mixing-valve actuator and Pt 1000 sensors.
Electrical installation and controller commissioning must be carried out by a suitably qualified person.
Download the English instructions for Danfoss ECL Comfort 100M